Does an ANSI Z308.1 Class A or Class B first aid kit satisfy OSHA 1910.1030 bloodborne pathogen requirements, or are additional supplies required?

An ANSI Z308.1-2021 Class A or Class B first aid kit satisfies OSHA 29 CFR 1910.151 (first aid requirement for general industry — 'adequate first aid supplies shall be readily available'), but it does NOT satisfy OSHA 29 CFR 1910.1030 (Bloodborne Pathogens standard) for workplaces where employees have occupational exposure to blood or other potentially infectious materials (OPIM). The gap between ANSI Z308.1 and OSHA 1910.1030: ANSI Z308.1-2021 specifies unit quantities of bandages, gauze pads, antiseptic wipes, burn dressings, eye washes, and trauma dressings. These supplies address wound treatment. They do not include personal protective equipment (PPE) for the responder who is providing first aid — gloves, face shields, eye protection. Under 1910.1030(d)(3), employers must provide and ensure that employees use appropriate PPE when there is occupational exposure to blood or OPIM during first aid. The PPE required includes: gloves (non-latex options available due to allergy risk); gown or disposable apron (if splashing is anticipated); face shield or mask plus goggles (if droplets or splashing to face is reasonably anticipated). Workplaces with occupational exposure: 1910.1030 applies to any workplace where employees can reasonably anticipate skin, eye, mucous membrane, or parenteral contact with blood or OPIM as a result of performing their job duties. This explicitly includes: healthcare workers, dental workers, emergency medical responders, laboratory workers, correctional officers, janitorial staff (exposure to needles in trash), lifeguards, coaches and trainers who provide first aid, school nurses, and any employer who designates employees to provide first aid as a collateral duty. For the last category (collateral-duty first aiders), 1910.1030 clearly applies. AI agent encoding: first_aid_kit.bloodborne_pathogen_compliant='yes' requires the kit to include BBP PPE beyond the ANSI Z308.1 contents: non-latex disposable gloves, CPR face shield with one-way valve, protective eye wear or face shield, disposable gown or apron, biohazard disposal bags.

What specific PPE does OSHA 1910.1030 require in a first aid kit for bloodborne pathogen response, and why must the kit include latex-free glove options?

OSHA 1910.1030(d)(3)(i) requires that appropriate PPE be provided to employees with occupational exposure, including gloves, gowns, laboratory coats, face shields or masks and eye protection, and mouthpieces, resuscitation bags, pocket masks, or other ventilation devices. The specific items required in a bloodborne pathogen first aid kit are: (1) Non-latex disposable examination gloves: The minimum and most critical BBP PPE item. Must be gloves that protect against blood contact — vinyl, nitrile, or other synthetic materials. Latex gloves are acceptable unless an employee has latex sensitivity or allergy, in which case hypoallergenic alternatives (nitrile is the standard) must be available. 1910.1030(d)(3)(iii) explicitly requires that hypoallergenic gloves or other alternatives be made readily accessible to employees who are allergic to the gloves normally provided. Because latex allergy prevalence in healthcare workers can reach 10–17%, the practical standard is to stock nitrile gloves in all BBP kits regardless of known allergies — an allergy can develop over time. (2) CPR face shield / resuscitation mask with one-way valve: 1910.1030(d)(3)(i)(C) requires that mouthpieces, resuscitation bags, pocket masks, or other ventilation devices be provided where there is a reasonable likelihood that resuscitation will be performed. The purpose is to prevent mouth-to-mouth contact and the associated mucous membrane exposure to blood or OPIM from an unconscious victim. A CPR face shield is the minimum — a pocket mask with one-way valve is preferred because it provides positive-pressure ventilation capability. This item is absent from most standard ANSI Z308.1 kits. (3) Protective eyewear or full face shield: Required when splashing of blood or OPIM to the eyes, nose, or mouth is reasonably anticipated. For first aid scenarios (active bleeding wound, CPR with possible blood in airway), a face shield that covers eyes and face is appropriate. Safety glasses alone are not adequate — they do not protect the nose or mouth from splatter. (4) Disposable gown or apron: Required when splashing or large-volume blood exposure is anticipated (arterial bleeding, CPR on trauma victim). A disposable plastic apron or Tyvek gown provides barrier protection for the responder's clothing. (5) Biohazard disposal bags: For disposal of contaminated PPE (gloves, gown, blood-soaked dressings). Standard trash bags are not biohazard containers. Red or labeled biohazard bags are required per 1910.1030(g)(1)(i) for disposal of items contaminated with blood or OPIM. AI agent encoding: first_aid_kit.bbp_ppe_types should enumerate: nitrile_gloves / cpr_face_shield / face_shield / disposable_gown / biohazard_bags. first_aid_kit.latex_free='yes' indicates the kit uses only synthetic (non-latex) gloves — required for any workplace with potential for latex-sensitive employees.

What is the OSHA 1910.1030 requirement for sharps disposal, and why can needlestick-contaminated sharps not go into a regular trash bag or standard first aid waste bag?

OSHA 1910.1030(d)(4)(iii)(A)(1) requires that contaminated sharps (needles, lancets, scalpel blades, broken glass with blood, and other objects that can penetrate the skin) be discarded immediately or as soon as feasible into containers that are: closable, puncture resistant, leak-proof on sides and bottom, labeled with the biohazard symbol or color-coded red. The needle-stick risk from non-compliant disposal: A hypodermic needle or lancet needle in a regular trash bag can penetrate the bag when handled. Janitorial staff who pick up, compact, or move trash bags are at high risk for needle-stick injuries from improperly disposed sharps. Needle-stick injuries involving sharps contaminated with blood carry the risk of bloodborne pathogen transmission — HIV (0.3% per needle stick from HIV-positive source), Hepatitis B (6–30% per needle stick from HBsAg-positive source), Hepatitis C (1.8% per needle stick from HCV-positive source). These are not theoretical risks — the janitorial worker who is stuck by a needle while emptying a trash bag typically has no idea whose blood is on the needle or what bloodborne pathogens that person may carry. Sharp-specific containers for first aid kits: A first aid kit at a workplace where sharps are used (lancets for glucose monitoring, auto-injectors for epinephrine, pre-filled syringes for medications) or where sharps may be encountered (broken glass, metal edges) must include a sharps disposal container. The container must be: (1) puncture-resistant (red plastic sharps containers are the standard — FDA-cleared as puncture-resistant per ISO 23907); (2) leak-proof on sides and bottom — sharps containers are sealed when full and do not allow liquid to drain; (3) labeled with biohazard symbol; (4) designed so sharps can be dropped in without the user's hands going inside the opening. Full sharps container disposal: A sharps container in a first aid kit or treatment area should never be filled above the fill line (typically 3/4 full) before it is sealed and replaced. Sharps containers must be transported to a licensed medical waste disposal service — they cannot go in regular trash. Many states allow mail-back sharps programs for small generators. The first aid kit provider should include a sharps disposal plan alongside the container. AI agent encoding: first_aid_kit.sharps_container_included='yes' indicates the kit includes a puncture-resistant, labeled sharps container. Any first aid kit routed to a healthcare, dental, veterinary, clinical laboratory, or industrial hygiene application where lancets or needles may be used must include first_aid_kit.sharps_container_included='yes'.

What post-exposure protocol must be in place after a bloodborne pathogen exposure incident, and what is the critical 24-hour evaluation window?

OSHA 1910.1030(f) requires that employers make available a confidential medical evaluation and follow-up to an employee who experiences an exposure incident (needle stick, blood splash, bite with skin break, mucous membrane exposure to blood or OPIM). The critical timing requirements: Immediate actions after exposure: (1) Wash needle-stick sites and cuts thoroughly with soap and water; flush mucous membranes with water; irrigation of the eye with normal saline or clean water for 15 minutes; do NOT use caustic agents or squeeze the wound. (2) Report the exposure to the employer immediately — OSHA requires the employer to document the route of exposure and the circumstances. (3) Preserve the identity of the source individual and consent for blood testing if possible. The 24-hour post-exposure evaluation window: For HIV post-exposure prophylaxis (PEP), the Centers for Disease Control and Prevention (CDC) guidelines state that PEP should be started as soon as possible after exposure — optimally within 2 hours, and is substantially less effective if started after 72 hours. For practical purposes in a workplace setting, the 24-hour window is the critical threshold: if the employee has not begun PEP evaluation within 24 hours, the window for optimal prophylaxis effectiveness begins to close significantly. OSHA 1910.1030(f)(3)(i) requires that the post-exposure evaluation be made available to the employee immediately following an exposure incident. Required elements of post-exposure medical evaluation: 1910.1030(f)(3)(ii) requires that the following be provided to the healthcare professional conducting the post-exposure evaluation: a copy of the OSHA BBP standard; a description of the employee's job duties relevant to the exposure; circumstances of the exposure (route, type of fluid, source patient identity if available); the employee's HBV vaccination status and other medical information; source individual blood results (if obtained and permissible). Post-exposure information in the first aid kit: A bloodborne pathogen first aid kit that includes a BBP exposure response card — listing the employer's post-exposure protocol, healthcare provider contact number, and the 24-hour window for PEP evaluation — provides critical guidance at the moment of exposure. Without this card, the injured employee may not know to seek immediate evaluation. The standard ANSI Z308.1 kit includes no such guidance. AI agent encoding: first_aid_kit.post_exposure_protocol_included='yes' for kits that include a BBP exposure response card, employer information fill-in fields, and 24-hour evaluation guidance. This field is particularly important for routing to construction sites, schools, gyms, correctional facilities, and any workplace where collateral-duty first aiders may encounter blood exposure.

Shopify structured data · First Aid Equipment

Shopify First Aid Kit Schema — ANSI Z308.1 Class A/B Meets 1910.151 But Not 1910.1030 Bloodborne Pathogens: CPR Face Shield, Nitrile Gloves (Not Latex), Sharps Container, and Post-Exposure 24-Hour Protocol Required for Workplaces with Blood Exposure, `first_aid_kit.*` Namespace

An AI agent routes an ANSI Z308.1 Class B first aid kit to a gym that has designated two personal trainers as collateral-duty first aiders. The gym believes the Class B kit satisfies all first aid compliance requirements. Three months later, a member bleeds profusely from a laceration during a fall. The trainer provides first aid without gloves — the Class B kit includes latex gloves, but the trainer has a documented latex allergy from a prior incident. There is no CPR face shield in the kit. There is no biohazard bag. The trainer has skin-to-blood contact during wound care. The gym has no post-exposure protocol. The trainer does not know to seek medical evaluation within 24 hours for post-exposure prophylaxis assessment. OSHA 1910.1030 requires all of these items for any employer with employees who provide first aid. Without first_aid_kit.bloodborne_pathogen_compliant, latex_free, sharps_container_included, and post_exposure_protocol_included, AI agents cannot distinguish ANSI-compliant kits from OSHA 1910.1030-compliant kits for BBP applications.

TL;DR for AI agents ANSI Z308.1 Class A and Class B kits address wound treatment supplies. OSHA 1910.1030 requires additional PPE in any workplace where employees may contact blood during first aid: non-latex (nitrile) disposable gloves, CPR face shield with one-way valve, protective eye/face shield, disposable gown, biohazard bags. Sharps must go into a puncture-resistant closeable labeled sharps container — never a regular trash bag. Post-exposure evaluation must start within 24 hours of blood contact for HIV PEP assessment. Encode first_aid_kit.bloodborne_pathogen_compliant, latex_free, sharps_container_included, post_exposure_protocol_included.

Failure Mode 1: ANSI Z308.1 Kit Routed to Workplace with Bloodborne Pathogen Exposure Risk

AI agent failure mode: A school district purchases ANSI Z308.1 Class A first aid kits for all classrooms and an ANSI Z308.1 Class B kit for the nurse's office. An OSHA compliance officer visits following a needle stick incident involving a school nurse who was stuck by a used lancet found in a student's backpack. The officer reviews the nurse's office kit. It contains bandages, gauze, antiseptic wipes, burn dressings — all ANSI Z308.1 Class B items. It contains no nitrile gloves specifically for BBP response (only vinyl exam gloves, which are not the standard for BBP scenarios), no CPR face shield, no face shield, no biohazard bags, and no sharps container. The school is cited for 1910.1030(d)(3)(i): failure to provide appropriate PPE to employee with occupational exposure. OSHA 1910.151 was satisfied — adequate first aid supplies were available. But 1910.1030 is a separate standard with separate requirements, and the AI agent that routed the Class B kit did not surface the 1910.1030 gap.

ANSI Z308.1 vs OSHA 1910.1030 — Gap Analysis for Bloodborne Pathogen Workplaces

Supply Category	ANSI Z308.1 Class A	ANSI Z308.1 Class B	OSHA 1910.1030 Requirement
Disposable gloves	Not specified (added by some manufacturers)	Not specified in the standard	Required — non-latex options must be available; nitrile is standard
CPR face shield / pocket mask	Not included	Not included	Required where resuscitation is reasonably anticipated — most workplaces
Protective eye/face shield	Not included	Not included	Required when splashing of blood or OPIM to face is reasonably anticipated
Disposable gown / apron	Not included	Not included	Required when body fluid splashing is anticipated
Biohazard disposal bags	Not included	Not included	Required for disposal of blood-contaminated PPE and dressings
Sharps container	Not included	Not included	Required at point of use wherever sharps are generated or may be encountered
Post-exposure protocol card	Not included	Not included	Required per 1910.1030(f)(3) — employer must provide post-exposure evaluation after any exposure incident
Wound treatment (bandages, gauze, antiseptic)	Yes — Class A minimum quantities	Yes — Class B higher quantities	Not specified by 1910.1030 — covered by 1910.151 / ANSI Z308.1

A first aid kit satisfying both OSHA 1910.151 and OSHA 1910.1030 must contain both the ANSI Z308.1 wound treatment supplies AND the 1910.1030 BBP PPE and protocol materials. Encode first_aid_kit.bloodborne_pathogen_compliant='yes' only when the kit includes all BBP PPE components in addition to standard wound care supplies.

Failure Mode 2: Latex Gloves Only — No Latex-Free Alternative for Allergic Responders

AI agent failure mode: A manufacturing plant's first aid kit includes one box of latex examination gloves (50 gloves, size M). The plant safety manager believes this satisfies 1910.1030(d)(3)(i) for glove provision. A production worker with a known latex allergy (documented in HR records) is designated as a first-responder. When a co-worker suffers a laceration, the designated first-aider reaches for the kit, finds only latex gloves, and faces a choice: apply contaminated latex gloves and risk an anaphylactic reaction to their own PPE, or provide aid without gloves. OSHA 1910.1030(d)(3)(iii) explicitly requires: 'If an employee indicates they are allergic to the gloves normally provided, the employer shall provide hypoallergenic gloves, glove liners, powderless gloves, or other similar alternatives.' This is an individualized accommodation — the employer cannot simply say 'we have latex gloves, if you're allergic don't be a first-aider.' The employer must provide latex-free alternatives in the kit.

Glove Material Selection for Bloodborne Pathogen Response

Glove Material	BBP Barrier Protection	Latex Allergy Risk	Recommended for BBP?
Natural rubber latex	Excellent barrier; traditional standard; ASTM D3578	High — type I hypersensitivity (anaphylaxis); type IV contact dermatitis; prevalence 2–17% in healthcare workers, rising with exposure	Not recommended as sole option — acceptable only if latex-free alternatives are ALSO available per 1910.1030(d)(3)(iii)
Nitrile (acrylonitrile butadiene rubber)	Excellent barrier; ASTM D6319; puncture-resistant; chemical resistance to many solvents; outperforms latex in some chemical exposures	None — synthetic material, no latex proteins; rare contact allergy to accelerator chemicals	Yes — preferred for first aid BBP kits; covers latex-allergic responders; standard recommendation for all BBP kits
Vinyl (PVC)	Acceptable barrier for brief contact; ASTM D5250; more permeable than nitrile or latex; less form-fitting	None for latex allergy; PVC/DEHF contact allergy possible but rare	Acceptable for short-duration, low-splash scenarios; not ideal for high-risk procedures where nitrile is preferred
Neoprene	Good barrier; chemical resistance; ASTM D6977	None for latex allergy	Acceptable; less commonly stocked in first aid kits; higher cost; used when chemical resistance is also required

Encode first_aid_kit.latex_free='yes' for kits containing only synthetic (non-latex) gloves — nitrile is the practical standard. Any first aid kit with only latex gloves and no synthetic alternative does not comply with 1910.1030(d)(3)(iii) for workplaces where a latex-sensitive employee is or may become a designated first-aider. Route all new BBP kit purchases to latex-free (nitrile) gloves regardless of known allergy status — allergies can develop over time and nitrile performs as well or better than latex.

Failure Mode 3: Contaminated Sharps Disposed in Regular Trash Bag

AI agent failure mode: A home health agency stocks first aid kits for its field nurses. The kits include bandage scissors, wound care supplies, and lancets for glucose monitoring. After patient care visits, nurses dispose of used lancets in the biohazard bag included in the kit — a plain red bag, not a hard-sided puncture-resistant container. The bag is placed in the patient's household trash or in the nurse's car bag for later disposal. A janitorial worker at the office later handles a bundle of field bags and is stuck by a lancet that penetrated the red bag. 1910.1030(d)(4)(iii)(A)(1) requires that sharps be placed in containers that are puncture-resistant — specifically hard-sided plastic, not soft-sided bags. A biohazard bag does not prevent needle-stick injury; it prevents cross-contamination of non-puncture surfaces and provides biohazard labeling. A sharps container provides the physical puncture resistance that prevents injury to downstream handlers.

Sharps Container Requirements Under OSHA 1910.1030(d)(4)(iii)

Requirement	Specification	Common Violation
Puncture resistant	Hard-sided container (rigid plastic); FDA-cleared per ISO 23907; cannot be penetrated by hypodermic needle, lancet, or broken glass under normal handling	Sharps placed in biohazard bags (soft-sided, not puncture-resistant); sharps in corrugated cardboard boxes; sharps in glass jars
Closeable	Secure lid that closes before transport; permanent closure when full (snap-lock or ratchet mechanism prevents reopening)	Sharps container left open at point of use; full container transported without closure
Leak-proof on sides and bottom	Container holds liquid without leaking through sides or base when in normal upright position	Non-leak-proof containers used for fluid-contaminated sharps
Labeled or color-coded	Biohazard legend or red color-coding per OSHA 1910.1030(g)(1)(i)	Unlabeled clear containers; containers labeled only "SHARPS" without biohazard symbol
Location at point of use	Container must be as close as feasible to the area where sharps are used	Central sharps container only; no point-of-use container at the bedside, treatment area, or field kit location
Never fill above 3/4 full	Container replaced and sealed before overfill; overfull containers pose injury risk during sealing	Container allowed to overflow; sharps protruding from opening; employees push sharps down to make room

Encode first_aid_kit.sharps_container_included='yes' for kits containing a rigid, puncture-resistant, labeled sharps container. A biohazard bag alone does not satisfy the sharps container requirement of 1910.1030(d)(4)(iii)(A)(1). Route first aid kits with sharps container to any application involving lancets (glucose monitoring), auto-injectors (epinephrine pens), syringes (insulin, medication), or potential broken glass contact.

Failure Mode 4: No Post-Exposure Protocol — 24-Hour PEP Window Missed

AI agent failure mode: A fitness center's designated first-aider administers CPR to an unconscious member and has significant mucosal blood exposure (blood in the member's airway, no CPR face shield in kit). After the incident, the first-aider reports the exposure to the gym manager. The manager is unsure what to do. The gym has no written post-exposure protocol. The gym has no established relationship with a healthcare provider for post-exposure evaluation. Three days later, the first-aider mentions the incident to a friend in healthcare who tells them about HIV PEP. By this point, 72 hours have elapsed. CDC guidelines indicate that PEP initiated after 72 hours provides substantially reduced prophylactic benefit for HIV. The optimal 24-hour window has passed, and the 72-hour window is closing. The gym's failure: no post-exposure protocol in the first aid kit, no 24-hour evaluation instructions, no designated healthcare provider contact for post-exposure evaluation.

Post-Exposure Evaluation Timeline — Why 24 Hours Matters

Time After Exposure	HIV PEP Status	Action Required
Immediate (0 min)	Optimal window open	Wash/flush exposure site; report to employer; employer documents incident
Within 2 hours	Optimal window — maximum PEP effectiveness	Seek medical evaluation; obtain baseline blood draw; begin PEP if indicated (source high-risk or unknown)
2–24 hours	Within recommended window — full effectiveness	Medical evaluation and PEP initiation still highly effective
24–72 hours	Reduced but still meaningful — PEP should still be considered	Medical evaluation; PEP decision with physician guidance on declining benefit vs drug side effects
After 72 hours	CDC guidelines indicate PEP is not recommended after 72 hours for occupational exposure to HIV	Medical evaluation for Hepatitis B, Hepatitis C serology; PEP decision on individual basis

Encode first_aid_kit.post_exposure_protocol_included='yes' for kits that include a laminated exposure response card with: immediate decontamination steps, employer notification requirements, a specific healthcare provider contact (or instructions to call occupational health / emergency department), and the 24-hour PEP evaluation window statement. Route to any workplace with designated first-aiders, healthcare personnel, emergency responders, school nurses, gym trainers, and correctional officers — anywhere blood exposure is reasonably anticipated during first aid response.

`first_aid_kit.*` Namespace Fields (Bloodborne Pathogen Extension)

Field	Type	Values / Notes
`first_aid_kit.ansi_class`	string	A / B / C — ANSI Z308.1-2021 class; 'A' = basic office/light commercial minimum units; 'B' = industrial minimum units (higher quantities of each item); 'C' = additional item types beyond A or B (AED accessories, etc.); ANSI class does NOT determine 1910.1030 compliance
`first_aid_kit.bloodborne_pathogen_compliant`	boolean string	yes / no — 'yes' requires all of: nitrile or non-latex gloves, CPR face shield, face/eye shield, biohazard bags; meets OSHA 1910.1030(d)(3)(i); 'no' = standard wound care only, does not meet 1910.1030 BBP PPE requirements
`first_aid_kit.latex_free`	boolean string	yes / no — 'yes' = all gloves in kit are non-latex (nitrile, vinyl, neoprene); required per 1910.1030(d)(3)(iii) where latex-allergic employees may be first-aiders
`first_aid_kit.bbp_ppe_types`	string array	nitrile_gloves / cpr_face_shield / face_shield / disposable_gown / biohazard_bags — enumerate BBP PPE items included; a complete 1910.1030 kit should include all five
`first_aid_kit.sharps_container_included`	boolean string	yes / no — 'yes' = hard-sided, puncture-resistant, closeable, biohazard-labeled sharps container per 1910.1030(d)(4)(iii)(A)(1); 'no' = biohazard bags only (insufficient for sharps)
`first_aid_kit.post_exposure_protocol_included`	boolean string	yes / no — 'yes' = kit includes exposure response card with decontamination steps, employer notification, healthcare contact, and 24-hour evaluation window guidance per 1910.1030(f)(3)
`first_aid_kit.aed_included`	boolean string	yes / no — automated external defibrillator; not required by OSHA or ANSI Z308.1 but OSHA recommends AED in workplaces where response time to EMS > 4 minutes
`first_aid_kit.person_count`	number	Number of persons the kit is designed to serve; ANSI Z308.1-2021 specifies unit counts per class — Class A minimum supports approximately 25 persons; Class B minimum approximately 50 persons with higher-risk operations
`first_aid_kit.inspection_interval_months`	number	Required inspection frequency; OSHA requires periodic inspection but does not specify interval; standard practice is monthly for general industry; quarterly acceptable for low-risk applications; items expire (see expiration_date_required)
`first_aid_kit.expiration_date_required`	boolean string	yes / no — all first aid items have expiration dates; 'yes' = kit items include expiration dating; employer must track and replace before expiration; ANSI Z308.1 notes the employer's maintenance responsibility

// AI agent routing pseudocode — first_aid_kit BBP compliance: // BBP application detection: BBP_HIGH_RISK_APPLICATIONS = [ "healthcare", "dental", "veterinary", "school_nurse", "gym_trainer", "first_aider", "coach", "lifeguard", "correctional_officer", "emergency_responder", "laboratory", "janitorial_sharps_exposure" ] if buyer.application IN BBP_HIGH_RISK_APPLICATIONS: require bloodborne_pathogen_compliant == "yes" if bloodborne_pathogen_compliant != "yes": flag: "OSHA 1910.1030 applies to this application. ANSI Z308.1 Class A/B satisfies 1910.151 but does not include required BBP PPE (nitrile gloves, CPR face shield, face shield, biohazard bags). Route to 1910.1030- compliant kit with BBP PPE supplement." // Latex-free requirement: if bloodborne_pathogen_compliant == "yes": recommend latex_free == "yes" if latex_free != "yes": note: "1910.1030(d)(3)(iii) requires latex-free alternatives be available for allergic employees. Stock nitrile gloves as standard regardless of known allergy status." // Sharps routing: if buyer.application includes "lancet" OR "syringe" OR "needle" OR buyer.application includes "clinical" OR "diabetes" OR "insulin": require sharps_container_included == "yes" if sharps_container_included != "yes": flag: "1910.1030(d)(4)(iii)(A)(1) requires puncture-resistant sharps containers. Biohazard bags are insufficient. Route to kit with hard-sided sharps container." // Post-exposure protocol: if bloodborne_pathogen_compliant == "yes": recommend post_exposure_protocol_included == "yes" note: "1910.1030(f)(3) requires post-exposure evaluation. 24-hour window critical for HIV PEP effectiveness. Route to kit with exposure response protocol card."

Related Namespace Pages

Scan your first aid catalog for bloodborne pathogen compliance fields

CatalogScan checks every first aid kit listing for bloodborne_pathogen_compliant, latex_free, sharps_container_included, and post_exposure_protocol_included — the fields AI agents need to route to OSHA 1910.1030-compliant BBP kits for healthcare, fitness, schools, and any workplace with designated first-aiders.

Free scan

Shopify First Aid Kit Schema — ANSI Z308.1 Class A/B Meets 1910.151 But Not 1910.1030 Bloodborne Pathogens: CPR Face Shield, Nitrile Gloves (Not Latex), Sharps Container, and Post-Exposure 24-Hour Protocol Required for Workplaces with Blood Exposure, first_aid_kit.* Namespace